For those who want more than just âsome bassâ: the A225-M is the ideal addition to any PSI Audio monitoring system, granting the same trademark fidelity to the lowest frequencies â precision down to 24 Hz!
The perfect low end in your studio
Given enough power, going low with a speaker is not too much of a challenge. Reproducing low frequencies with precision, however, is a different matter entirely. The PSI Audio Sub A225-M brings a whole new dimension of accuracy to the low end.
PSI Audio has translated its general approach of unaltered, maximum fidelity reproduction to the bass spectrum, allowing for a riveting experience that will change the way you work. Taking the guesswork out of the bass management, the A225-M grants an accurate representation of what is really going on âdown belowâ. Take control and create a sonic wonderland that reaches throughout the entire spectrum with no insecurities and no need to double-check your work on a different system. Get a subwoofer you can trust.
Frequency Range
24Hz â 100Hz
Typical listening distance
from 1.5m
Handmade in Switzerland
Data | | [Unit] |
---|
Potential peak power | 480 | W |
Continuous max SPL@1 m | 108 | dB |
Short term max. SPL@1m | 111 | dB |
Peak max. SPL@1m | 115 | dB |
Signal to noise ratio (S/N) | 102 | dBA |
Bandwidth at -6dB | 24-100 | Hz |
SPL tolerances |  ±2.0 | dB |
Phase tolerances |  ± 45 (300 Hz â 500 Hz) | deg |
System | 1 | ways |
Woofer ext. diam. | 293 (2x) | mm |
Woofer ext. diam. | 11.4 (x2) | in |
W. diaphragm diam. | 213 (2x) | mm |
W. diaphragm diam. | 8.3 (x2) | in |
Dimensions W x H x D | 320 x 700 x 500 | mm |
Dimensions W x H x D | 12.6 x 27.7 x 19.9 | in |
Net Weight | 35.6 | Kg |
Net Weight | 78.4 | lbs |
Input connector | 2 x XLR F2 x XLR M | |
Warranty | 5 (+1) | years |